Outdoor tents are sheds propped on the ground to shelter from wind, rain and sunlight and for temporary living. It is mostly made of canvas, together with supporting things, which can be removed and transferred at any time. The tent is carried in the form of parts and assembled after arriving at the site. Therefore, various parts and tools are required. Understand the names and usage of each component, and be familiar with the structure of the tent, so that the tent can be erected quickly and easily.
constitute
(1) Fabric
Technical indicators of waterproof fabrics are subject to the degree of waterproofing.
The water repellent is only AC or PU coated on the outside. Generally only or game account
Waterproof 300MM is generally used for beach tents/shading tents or cotton tents for drought and less rain
Waterproof 800MM-1200MM for conventional simple camping tents
Waterproof 1500MM-2000MM is used for relatively mid-range tents, which need to travel for many days.
Waterproof tents above 3000MM are generally professional tents that have been treated with high temperature/cold resistance techniques.
Bottom material: Generally, PE is the most common, and the quality depends mainly on its thickness and warp and weft density. It is better to use Oxford fabrics for higher grades, and the waterproof treatment should be at least 1500MM.
The inner fabric is generally breathable nylon or breathable cotton. The quality mainly depends on its density.
(2) Support frame
The common one is glass fiber tube, the material is generally glass fiber reinforced plastic, the difference is the diameter
It is more professional and more important to measure its quality.
Bracket
There are the following types of tent brackets:
1. Elastic steel: This type is generally children’s account or beach game account
2. The most common is that the glass fiber tube has a series of 6.9/7.9/8.5/9.5/11/12.5. The thicker the steel, the stronger and the weaker the softness. Therefore, whether the choice of the fiber tube bracket is reasonable is determined by the ratio of the size of the ground to the height. It is easy to break if it is too thick or too thin.
For example: 210*210*130 is a relatively classic size, the tube is generally 7.9 or 8.5.
3. Aluminum alloy frame: It is relatively high-end, and it is difficult to inspect according to the alloy ratio. Generally, the overall curvature of the original bracket is calculated first and then processed by hot pressing. The characteristic is that it is light and easy to carry, but it is not easy to fold, but it is easy to bend and deform if the quality is not good.
